27
2024
-
02
Analysis of working principle of hydraulic tipping bucket
Author:
The hydraulic tipping bucket is mainly composed of three parts: tipping bucket mechanism, hydraulic system and control system.
Composition of 1. hydraulic tipping bucket
The hydraulic tipping bucket is mainly composed of three parts: tipping bucket mechanism, hydraulic system and control system.
The tipping bucket mechanism is composed of a bucket body, a tipping bucket cylinder, a rotating shaft and other parts. The bucket body is the part used to store goods, the tipping bucket cylinder is the part used to control the tilting of the tipping bucket, and the rotating shaft is the part used to connect the tipping bucket mechanism and the body.
The hydraulic system includes hydraulic pump, hydraulic oil tank, hydraulic solenoid valve and other parts. The hydraulic pump is responsible for conveying hydraulic oil, the hydraulic oil tank stores hydraulic oil, and the hydraulic solenoid valve is responsible for controlling the tilt of the tipping bucket.
The control system includes operating rod, directional valve and other parts, through the operating rod to control the trip of the tipping bucket cylinder, directional valve control the direction of oil flow.
The working principle of 2. hydraulic tipping bucket
When the operator controls the stroke of the tipping bucket cylinder through the operating lever, the hydraulic pump presses the hydraulic oil into one side of the cylinder, so that the cylinder moves to the other side, thereby realizing the tilt of the tipping bucket. When the hydraulic pump stops working, the directional valve will automatically close, and the hydraulic oil will stop flowing, so that the tipping bucket maintains a stable tilt state.
The working principle of the hydraulic tipping bucket is to use the pressure of the hydraulic oil to achieve the tilt of the bucket body, so that the cargo can be dumped out.
Control mode of 3. hydraulic tipping bucket
The control mode of hydraulic tipping bucket is mainly divided into manual and automatic.
The manual control mode requires the operator to control the stroke of the tipping bucket cylinder through the operating rod to realize the tilt of the bucket body.
The automatic control mode is to detect the situation of the goods by setting the sensor, and automatically tilt the tipping bucket to realize the automatic pouring function.
4. Summary
This paper analyzes the composition, working principle and control mode of the hydraulic tipping bucket. It can be seen that the hydraulic tipping bucket has a wide range of applications in different occasions. In actual work, it is necessary to pay attention to the daily maintenance of the hydraulic tipping bucket to ensure its performance and life.
The gearbox is a mechanical device used to change the torque and speed of the engine to adapt to different road conditions and workloads. It is usually composed of gears, gears, clutches, etc. in the transmission system. It is widely used in automobile, engineering machinery, ship, aircraft and other fields.
2024-02-27
Related Functions and Applications of Automobile Front and Rear Axles
The axle (also called the axle) is connected to the frame (or load-bearing body) through the suspension, and wheels are installed at both ends. The vertical load on the frame is transmitted to the wheels through the axle; the rolling resistance, driving force
2024-02-27
A technology-based enterprise specializing in independent development, manufacturing and sales of micro-cars, fuel tricycles, electric tricycles, and electric four-wheel axle transmission systems.
Address: No. 24, Manan Avenue, Zone B, Luohuang Industrial Park, jiangjin district, Chongqing
Mobile website
